How to make a stretcher for the canvas with your hands? Manufacturing technology design

Date:

2018-03-18 13:20:53

Views:

399

Rating:

1Like 0Dislike

Share:

Table of contents:

The sub-frame is a structure assembled of wooden slats or planks. It can be of different size and purpose. To make a stretcher for canvas your hands will not be difficult. For this you need to know what kind of design will need to or otherwise.

the stretcher for the canvas with their hands

Types of subframes

They are of two types: prefabricated and deaf. The first type is a modular and V-subframes. The second is characterized by a solid and reliable connection of all elements. It cannot tighten or change the distance between the slats, unlike the modular panels.

Prefabricated structures are sold as separate strips. Their cost is slightly higher than the common subframes. They are popular because they can be used for stretching canvas paintings below the frame and without it.

Any subframe needs to be endowed with the following characteristics:

  • Strength – all elements are securely fastened together;
  • Wear resistance – to collect design you need only from dry wood;
  • To conform to the dimensions of the picture.

For this reason, it is necessary to choose a quality material for the manufacture of the structure.

Select raw materials for products

To make the stretcher for the canvas with your hands, you will need wood. It can be pine, oak, birch, mahogany and other varieties. The material should be well dried, processed and prepared. Otherwise the structure will eventually begin to deform.

Make a hollow subframe

This type products is more popular because of its low cost. Make such a stretcher for the canvas with their hands everyone can.

how to make a stretcher for canvas with their hands

You will Need the following tools and materials:

  • Wood slats or planks;
  • Line;
  • Hacksaw;
  • Joiner's glue;
  • Furniture stapler;
  • Sandpaper;
  • Hammer;
  • Furniture corners.

How to make a stretcher for the canvas with your hands? To start the process of making, you must determine the size of the future product. Then you need to cut two vertical and two horizontal straps. This can be done at an angle of 45 degrees.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

The items Received are treated with sandpaper. The surface must be smooth and should not contain knots. The end elements coat the two sides with carpenter's glue and connect. The design is durable to the inner side of the mounted furniture corners at the corners of the frame.

Then the item is coated with several layers of varnish or paint. This will help protect the wood from moisture and other corrosive influences.

Modular design

Such a stretcher for the canvas with their hands to make also just. It has all the features as the standard product of a deaf type. The main difference are the bolts and nuts located at the corners of the product. With their help adjust the tension of the canvas so that the canvas does not SAG. For the manufacture of the structure will need the same materials and tools as for the previous products.

We Stretch canvas on stretcher ready

how to stretch the canvas on a frame with their hands

Process an inexperienced person can be time consuming. How to stretch the canvas on stretcher bars with your hands? Initially, you must check the diagonal of the structure. Then the product is placed the picture so that the picture was in the center. Fix the canvas on all sides of the stretcher with staples (one staple – one side).

After that carry out similar actions across the surface of the structure. The distance between the straps should be at least 2-3 cm cut off the Excess canvas with scissors, and the raw edges are folded and glued to the inside of the subframe. The picture is decorated.


Article in other languages:

BE: https://www.tostpost.com/be/hatn-tul-nasc/10094-yak-zrab-c-padramn-ku-dlya-palatna-sva-m-rukam-tehnalog-ya-vyrabu-kans.html

DE: https://www.tostpost.com/de/gem-tlichkeit/10092-wie-man-keilrahmen-f-r-die-leinwand-mit-seinen-h-nden-fertigungstechni.html

ES: https://www.tostpost.com/es/la-comodidad-del-hogar/10098-como-hacer-un-bastidor-auxiliar-para-el-lienzo-con-sus-propias-manos-t.html

KK: https://www.tostpost.com/kk/domashniy-uyut/10096-alay-podramnik-sh-n-kenept-z-oldarymen-dayyndau-tehnologiyasy-konstruk.html

PL: https://www.tostpost.com/pl/komfort-domu/10089-jak-zrobi-rama-pomocnicza-dla-obszaru-w-asnymi-r-kami-technologia-budo.html

PT: https://www.tostpost.com/pt/o-aconchego-do-lar/10086-como-fazer-uma-maca-de-lona-com-suas-pr-prias-m-os-a-tecnologia-de-fab.html

TR: https://www.tostpost.com/tr/domashniy-uyut/10100-nas-l-sedye-tuval-i-in-kendi-elleriyle-retim-teknolojisi-in-aat.html

UK: https://www.tostpost.com/uk/domashn-y-zatishok/10096-yak-zrobiti-p-dramnik-dlya-polotna-svo-mi-rukami-tehnolog-ya-vigotovle.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

What is the heating registers

What is the heating registers

Faced with some new concept that people are looking for the answer to the question associated with it. One day one of them  could be the issue of what are the registers? In this case we are talking about the element of the he...

Foundation beams, especially the use

Foundation beams, especially the use

During the construction of the production facilities used freestanding support. For walls use the Foundation beams that allow you to fasten the entire frame of the base structure. Positive aspects in their application is to increa...

Refractory fireclay brick: price, reviews, size

Refractory fireclay brick: price, reviews, size

Brick refractory fireclay was so named due to the fact that the product contains 70% fire clay called fireclay. In the process of production of the homogeneous mixture is in the phase of firing.Dimensions and weightthe products De...

Improvised frame for Bulgarians

Improvised frame for Bulgarians

in order to use the grinder, the master of quite often acquire a frame. This addition to the tool you can buy or make yourself.Should you purchase a framethe Frame of Bulgarians are different: for example, Chinese. Such elements a...

Modern sofa: overview, models, views, and reviews

Modern sofa: overview, models, views, and reviews

nowadays the design of the room are paying much more attention than a few decades ago. This not only considers the appearance of the premises, the style and finish of the rooms, but also carefully chosen interior. And the importan...

The height of the chimney relative to the ridge of the roof: the rules of calculating, parameters and requirements

The height of the chimney relative to the ridge of the roof: the rules of calculating, parameters and requirements

During the construction of the premises, equipped with a fireplace, stove or other heating devices with the supply of solid fuel, it is important to give sufficient attention to the fume paths. The height of the chimney relative t...