Mount for phone in car: review car holders

Date:

2019-12-23 12:00:18

Views:

432

Rating:

1Like 0Dislike

Share:

Table of contents:

In the passenger compartment must be a minimum of devices and gadgets that will make driving easier, but at the same time will not be a hindrance. Modern gadgets in the form of GPS navigators, tablets and phones are perceived by experienced drivers including as full-time assistants in the car. But even if you do not plan to use the same smartphone as navigation tools or inform about traffic jams, it is quite possible to entrust the implementation of the primary functions during movement. But it is important to choose a mount for your phone in the car, which eliminates problems during the operation of the device. The market offers a variety of options such clips, and the following review will help determine the best option of this device.

mount phone

Sucker for phones

This is the simplest way fixing device that allows you to inexpensively fix the gadget to the glass. But for the affordable price and simple principle of operation the owner of such adaptations will have to pay certain efforts. In particular, mount for phone in car glass in the form of a Cup is not reliable. That is, when driving over potholes design is more likely to fall regularly, that does not allowed to operate an expensive mobile device.

Still, for infrequent use or as a backup striker this option it is possible to be armed. Is the usual suction Cup with a niche for the mobile device 200 rubles., and for its installation almost do not have to bother with configuring complicated fixing structures. This applies to the generic options passivhauses accessories, but also on the market you can find a special mount for a phone from this category that is devoid of the disadvantages of conventional silicone.

Recommended

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

Fixing pegs

These devices do not have difficulty to install and, most importantly, leave no marks on the glass. In contrast to the simple suction cups, clothespin has a larger size, making it difficult to regarded as a convenient and reliable fasteners. But since it is a kind of a base bracket for your phone, the driver can adjust the position of the gadget to suit your needs – turn, turn, lower, etc. Again, there are different versions of a clothespin and it is very important to pay attention to the density of the clips and the plastic quality that is most often used in the production of this accessory. Poor quality Assembly, for example, may cause rattling of the structure when moving, is not the best way to affect the control of the machine.

mount for phone in car

Locks brand Red

Refer to the specialized products, designed for mounting phones in the car, it is worth once was estimated at least approximate the requirements for this accessory. For undemanding users recommend Chinese cheap. Perhaps it was one of those lines will meet a suitable option. For example, a manufacturer produces Red car holder in the form of a tape, which costs about 100 RUB. we Can say that mount from the category of disposable, but the base support device in extreme cases, it to able. However, the fixation is realized only on the side – the lower insurance is not provided.

The Holders of the brand Koto

Another representative of the Chinese market, but this time we are talking about a more serious accessory, which costs about 500 rubles. the Company produces devices that are suitable for phones, and for smartphones with Android smartphones and tablets regardless of their size. The design is formed by the suction Cup on the glass and disc with the adhesive layer, through which you can execute mount your phone on the dashboard of the car without any additional devices. Vacuum is provided by a screw mechanism. As for the controls, the user is able to adjust the design width and can adjust the angles of rotation.

holder

Wizard from Mini Handy-Telefonhalter

It is German, the products manufactured by the firm Richter. Fasteners of this brand are also suggest the possibility of fixing on the glass surface, and the torpedo – the kit contains a special addition. To features mount for phone in car Richter, should include a wide range of adjusting positions, as well as the attention to detail is excellent. Perhaps for long-term maintenance is not cheap of the device while the vehicle is in motion, this option will suit best. The developers have thought this through a special system of pads under telephone, which allows you to gently contain the case regardless of vibrations. Flexible bracket it gives the option of installing the latch in almost any position.

Fasteners Bracketron

holder for smartphone

Not Cheap, but durable and reliable method of fixing any portable gadget. Chinese firm Bracketron decided to combine two different approaches to the manufactureclips. For a basis was taken the mount for the phone in the car in the form of a stand. It is the platform which is in the horizontal position and capable in your niche, even a small tablet, while maintaining reliability. The advantages of this holder can be attributed to special material on which no trace remains.

The Second part of the fastener is formed by a platform on which is placed the suction Cup holder. Immediate fixation is desirable to carry a torpedo. Unfortunately, the mount for the phone in the car can only be installed on this part. This option is suitable in case of regular use of gadgets inside the car. It is possible to record not only regular-sized phones, but also a larger technique – navigators, tablets, etc.

The Holders of the brand JIO

Under the brand JIO come out not cheap, but quality and functional holders with solid circuitry. Most devices are also supplied with Velcro, has a massive platform and is installed on the dashboard. As the producer, already the standard model of the average level can hold gadgets of the order of 500 grams. In this case the guide members allows different to adjust the position of the object. It is not only a holder for a smartphone, but also a means of fastening the same GPS or tablet. As for the price tag, then buy the youngest model you can average 1, 000. More solid, attractive and functional accessories is estimated at 1 500-2 000 RUB. in addition to the high cost, there is another drawback in fasteners of this brand – they are not universal and require initial verification of the capabilities of the installation with the characteristics of the fasteners.

What is different about the magnetic holder?

mount for phone in car

A Feature of such devices is the principle of work – the retention is carried out by means of magnets. The most common active element is a neodymium magnet, which has long lifespan and no adverse toxic effects on the driver and passengers. Locking device on the instrument panel, air duct and even the steering column. There are models for smartphones and tablets – in both cases, accessory cope with the weight. In the structural-based magnetic mount includes a metal support of a small size. It can be fixed with tape – the magnet, in turn, to provide substantive support.

How to select option for mini-devices?

Manufacturers are trying to make models of fasteners for small gadgets small, but functional. Usually the portion of the fixation device is a sliding mechanism on the bracket with the hinges. In any case, such performance is considered optimal. Also pay attention to the quality of the materials. It is advisable to place in direct contact with the device was rubberized. If you select a holder for the smartphone with the possibility of turning it is better to go to multi-function options. It can be fit with suction cups, and platform fasteners for the instrument panel.

magnetic holder

How to choose fasteners for large gadgets?

Loose the retainer and gadgets in his niche – the main parameters of the choice models of this type. If we are talking about massive tablets and smartphones, it would be preferable to install on the dashboard. It is a reliable and convenient way to accommodate the holder. As for materials, you should Orient the metal – steel or aluminum. It should be noted that the car mount for large devices may have limitations in the regulations. Angles and turns, as a rule, are calculated before installation. Of course, such devices are not cheap – of the order of 1 500 rubles. And more importantly, for the massive gadget will only fit the same size stand-locking, which will probably be to close part of the review. You can alternatively choose the options to mount, but they have drawbacks even more.

Conclusion

mount for phone in car glass

In Addition to the functionality and reliability of the fastener, it will be useful initially to take into account the aesthetic worth of a particular model. Still, the interiors of modern cars themselves show a fairly high level of design execution. Accordingly, the accessories you need to pick a specific interior. In terms of colors you can note the variety of traditional neutral colors as well as the particular colorful versions of the clips. However, extremely bright fixture for your can distract from the road. In terms of materials the choice is not especially rich. It or plastic, or metal. Sometimes there are models interspersed with wooden and glass elements, but this is rare and, as a rule, the representatives of the exclusive series. Another thing, the presence of a rubber lining and inserts that retain the outer covering of the body in its original form. Also consider the possibility to use the fixture for other gadgets. For example, stands with the regulators installed in the instrument panel, it is suitable for small phone to large tablet.


Article in other languages:

AR: https://www.tostpost.com/ar/cars/20368-mount-for-phone-in-car-review-car-holders.html

BE: https://www.tostpost.com/be/a-tamab-l/38034-macavanne-dlya-telefona-a-tamab-l-aglyad-a-tamab-l-nyh-trymal-n-ka.html

DE: https://www.tostpost.com/de/autos/37660-halterung-f-r-das-telefon-im-auto-berblick-ber-kfz-halter.html

ES: https://www.tostpost.com/es/coches/37425-soporte-para-tel-fono-en-el-autom-vil-revisi-n-de-autom-viles-de-los-t.html

HI: https://www.tostpost.com/hi/cars/22061-mount-for-phone-in-car-review-car-holders.html

JA: https://www.tostpost.com/ja/cars/20026-review.html

KK: https://www.tostpost.com/kk/avtomobil-der/38425-bek-tu-sh-n-telefon-vin-sholu-avtomobil-staushylardy.html

PL: https://www.tostpost.com/pl/samochody/39969-uchwyt-na-telefon-do-samochodu-przegl-d-samochodowych-uchwyt-w.html

PT: https://www.tostpost.com/pt/carros/39621-montagem-para-um-telefone-no-carro-revis-o-de-autom-veis-titulares.html

TR: https://www.tostpost.com/tr/arabalar/34905-montaj-i-in-telefon-ara-genel-bak-otomobil-sahipleri.html

UK: https://www.tostpost.com/uk/avtomob-l/38830-kr-plennya-dlya-telefonu-avtomob-l-oglyad-avtomob-l-nih-vlasnik-v.html

ZH: https://www.tostpost.com/zh/cars/41010-mount-for-phone-in-car-review-car-holders.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"IZH 350 Planeta Sport" – frisky Soviet bike

it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...

Scooter Racer: specifications and reviews

Scooter Racer: specifications and reviews

What distinguishes a scooter from a motorcycle? One of the qualities – easily. The scooter easier to maintain, more maneuverable on the road, does not require registration (though this is debatable, if you don't plan to be d...

Useful and stylish tuning

Useful and stylish tuning "Prado 120" with their hands. Select the tuning for "Toyota Prado 120"

"Tuning Prado 120", photos of which are presented in the article is a few types. It includes exterior and interior enhancements, revision of engine and chassis, speakers, wheels and tires. All of these components need to modernize...

How to choose running lights on cars? Overview, types, features and reviews

How to choose running lights on cars? Overview, types, features and reviews

the Theme of daytime running lights is quite relevant among motorists. Many drivers in order to save assemble these systems your own hands. There are many homemade options that are more tuning than a functional solution. These pro...

Volkswagen van: a review of popular models

Volkswagen van: a review of popular models

Great attention is given to the car «Volkswagen» truck. The company has been began to produce trucks which are known all over the world. They are characterized by high permeability, capacity, convenience and comfort.Wh...

Yamaha Warrior XV 1700: specifications

Yamaha Warrior XV 1700: specifications

the Beginning of the XXI century in the motorcycle world witnessed the emergence of a new Japanese cruisers on two wheels. Yamaha Warrior – is one of them. Many consider him the favourite of the ruler. It is possible that th...