MAZ-509: a brief description, interesting facts

Date:

2018-03-28 10:42:11

Views:

882

Rating:

1Like 0Dislike

Share:

Table of contents:

As you know, every war ends sooner or later the world. It is not surprising that the Soviet Union won the time of Nazi Germany, after the end of hostilities began to actively rebuild the destroyed state property. Needless to say that any construction work that requires special equipment. In this regard, a special burden was placed on the Minsk automobile plant, which began production of its own truck. About it and we will discuss in this article, and find out in particular how much weight the frame of the MAZ-509.

MAZ-509

Updated fleet

Initially, 500 series, of which this car is a progressive and turned over to some extent the minds of Soviet engineers and drivers. And all because the developers of the machine proposed to place the motor directly under the cockpit, not in front of her, as it was previously. Also the cabin has received property of a rollover, which allowed easy access to the main nodes of the MAZ-509. In addition, the lack of the bonnet gave the possibility to increase the length of the truck and increase its capacity. Initially this engineering proposal has been met with hostility, however, international experience has shown that these machines are quite viable, and therefore the technical Commission approved the project.

MAZ-509 specifications

Start production

April 6, 1966 Assembly of the first instance MAZ-509П. This truck was made, that is, the piece had some drawbacks, which are quite quickly corrected directly on the ready-made machines.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

Technical parameters of this truck had significant differences from those cars that the Minsk factory produced before. Let's start with the fact that the bridges MAZ-509 were all-wheel drive, and this unit was the only one who went to the series.

A Worthy replacement

Phased technical upgrade of the machine has led to the fact that she was able to go faster. The speed of the truck increased from 60 km/h to 65 km/h, made possible by the change gear ratios of the gearbox. MAZ-509 differed from its progenitor and that had a wider wheelbase, the value of which has increased immediately by 10 inches. Also, there are double disc clutch, and increased load capacity (half a ton). The front axle was also changed: it was established conventional planetary gearboxes instead.

bridges MAZ 509

Purpose

The MAZ-509, the frame of which was distinguished by increased rigidity have been developed and used for the carriage of timber as a special road and panel lines. However, he had the opportunity to go into the logging. To ensure optimal conditions for loading/unloading the car since 1969, beginning to be supplied with a hoist having a rotating horseman and a folding stand. The Mountie was able to withstand a load equal to 5500 kgs. The truck is equipped with trailer-dissolution: TMZ-803М or GBK-9383. These mechanisms had two axes and the device samokatskaya, which allows to fold the truck and trailer to ship it on a tow truck. In those moments when the truck has not been used and was loaded on the truck, MAZ has become biaxial. When there is a need to transport wood, the trailer was displayed and the truck transformed into a four-axle, both axle he was leading.

Features

The MAZ-509 had six-cylinder power unit (engine) cylinders are in the shape of the letter V. In the presence of a water cooling system. The power of the motor was such that the truck could be the truck tractor. Have differences and transmission, which allowed to be the car all-wheel drive.MAZ-509 frame

Technical data

The MAZ-509, specifications of which are given below has been sufficiently strong timber with a high degree of permeability, which was explained by the necessity of its use is far from human populated areas with difficult terrain and weather conditions.

The Parameters of the truck is as follows:

  • Length – 6770 mm.
  • Height-2900 mm.
  • Width-2600 mm.
  • Ground clearance-300 mm.
  • Curb weight-8800 kg.
  • Propulsion Type-YAMZ-236 diesel.
  • Engine capacity – 11,15 liters.
  • Motor Power – 200 horsepower.
  • Transmission Type-automatic, five-speed.
  • Average fuel consumption-48 litres for every 100 km.
  • Limit the speed of movement – 65 km/h.
  • Maximum capacity – 21 ton.
  • Maximum length of the transported wood – 27 m.
  • Both bridges leading.
  • Winch has a worm gear and is driven from the power takeoff.
  • Fuel tanks – two for 175 liters each.
  • Own weight per front axle-4410 kg.
  • Own weight distributed to the rear axle – 4390 kg.
  • Maximum weight of loaded trailer - 21 000 kg.

what is the weight of the frame of the MAZ 509

Interesting facts

It is Worth noting that MAZ-509 was repeatedly subjected to the experiments. They were related to the fact that on its basis was developed the other four-wheel drive cars. One of these wasdump truck MAZ-509Б, completely unified with 509-d model and army truck tilt type. However, none of the above options somehow not entered the mass production, even despite the fact that fully meet all technical standards and requirements of the time.

In 1978, rolled off the Assembly line of MAZ-509А, which differed from its predecessors only external features, but not the internal content. The production of this truck was completed almost simultaneously with the collapse of the Soviet Union, but some cars and still quite actively exploited.


Article in other languages:

AR: https://www.tostpost.com/ar/cars/5158-maz-509.html

BE: https://www.tostpost.com/be/a-tamab-l/9166-maz-509-karotkae-ap-sanne-c-kavyya-fakty.html

DE: https://www.tostpost.com/de/autos/9169-maz-509-kurzbeschreibung-interessante-fakten.html

ES: https://www.tostpost.com/es/coches/9176-maz-509-breve-descripci-n-de-los-hechos-interesantes.html

HI: https://www.tostpost.com/hi/cars/5161-maz-509.html

JA: https://www.tostpost.com/ja/cars/5159-maz-509.html

KK: https://www.tostpost.com/kk/avtomobil-der/9171-maz-509-ys-asha-sipattamasy-yzy-ty-fakt-ler.html

PL: https://www.tostpost.com/pl/samochody/9171-maz-509-kr-tki-opis-ciekawostki.html

PT: https://www.tostpost.com/pt/carros/9166-maz-509-uma-breve-descri-o-fatos-interessantes.html

TR: https://www.tostpost.com/tr/arabalar/9176-maz-509-k-sa-bir-a-klama-ilgin-ger-ekler.html

UK: https://www.tostpost.com/uk/avtomob-l/9170-maz-509-korotkiy-opis-c-kav-fakti.html

ZH: https://www.tostpost.com/zh/cars/5601-509.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

The biggest machine. The biggest truck. Very large machines

The biggest machine. The biggest truck. Very large machines

Large-scale industry – great technique! It is a slogan, perhaps, of all the giants of the global industry. Incredible strength and power industrial machine – not just success, but also a symbol of leadership in large-s...

Lada 2116. The project ends

Lada 2116. The project ends

In 2004, in the secret laboratories of JSC "AVTOVAZ" (which, however, and doors and Windows are open around the clock) was created by the concept car Lada 2116. The management of the auto giant kept secretive until the opening of ...

Ball joints: replacement (VAZ-2110) with their hands

Ball joints: replacement (VAZ-2110) with their hands

a Rather unpleasant feeling given to the driver, if there is any damage to the vehicle chassis. One of the affected nodes are the ball joints. Replacement (VAZ-2110 has in its design two of them – on the left and right side)...

Diesel engine

Diesel engine "JAMZ-530": specifications, design and operation

At the Yaroslavl capacities of OJSC “the Autodiesel” December 2013 manufactured diesel units family “YAMZ-530”. This includes so far only two models of engines – four and six - cylinder engines.In our...

Car

Car "Nissan Fuga": technical features, description and reviews

“Nissan Fuga" first appeared before the eyes of motorists in 2003, at a presentation in Tokyo. This attractive machine has sparked the interest of many people. However, I developed it specifically for the domestic marke...

Mercedes CLK - specifications, design and equipment of the popular German car

Mercedes CLK - specifications, design and equipment of the popular German car

for the First time the Mercedes CLK was presented in 1997 in Detroit. And despite the fact that outwardly it was similar to the E-class technical base for this car was the compact C-class. In General, this model has lots of intere...