Airbrush with your own hands at home: design and fabrication

Date:

2018-03-24 07:29:16

Views:

466

Rating:

1Like 0Dislike

Share:

Table of contents:

Well-Groomed hands with an attractive manicure for women — a measure of grace. Professionals use various techniques for applying beautiful designs on nails, especially it has become fashionable to do airbrushing. The main instrument for its implementation is a small gun for spraying paint, which is not so cheap. That is why many try to do the airbrush with your own hands at home.

The device

This device Operates as follows: the present in the valve the air is compressed, thereby creating a strong pressure and spraying the special dye. Its main advantage is that it allows you to create on the nails smooth color transitions. The patterns drawn by this device, always are three-dimensional and realistic.

Varieties of spray guns

Airbrush nail can be single or double action. Simple homemade pneumatic guns it is possible to regulate the flow of the ink liquid. As a rule, use such device with stencils. With him are vivid and clear patterns on the nails.

But in the devices dual-action controls not only the supply of paint, and even air flow. Setting them is done by hand with a special valve. This airbrush for nail art allows you to do more precise and beautiful images with subtle elements. By adjusting the air flow to change the thickness of lines.airbrush with your own hands at home

What is airbrush?

Varieties of pneumatic spray there is a huge number, but the structure are almost the same. Created by airbrush with your own hands at home is most of the parts such as:

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

  • Needle, controlling the flow of colorant.
  • Nozzle that represents the element at the end of the tool to adjust the thickness of the jet, with a diameter of at least 0.2-0.3 mm.
  • The Adjustment lever and the valve to control the level of air and fluid, the creation of optimum pressure in the system.
  • A Tank in which poured the varnish or paint for printing.
  • Handle, however, it is not available in all vehicles.
  • Air valve that performs the transmission of air to the nozzle.

airbrush nail

By the Way, assembled the airbrush with your own hands at home will be efficient to work with the compressor creates the necessary pressure. Therefore, you should take care of its manufacture.

How to make an airbrush out of a ballpoint pen?

To build such a tool, you need to prepare in advance:

  • A simple pen for writing;
  • Sealant or adhesive;
  • Wine stopper;
  • An empty glass jar with a volume of 0.5 liter (preferably with lid).

First and foremost, to unleash the body of a ballpoint pen and pull out the terminal from which you have to blow all the ink. Then it should be thoroughly washed using a solvent and dried. As the nozzle will be the case from the handle, so don't throw it away.

If you have problems with cleaning rod, you should try to do it with a syringe. For this it is necessary to heat its nozzle, and set the rod a little razvalyaev, and then pull the liquid dye.

Then, in the tube is from one side notch to the middle, then it should turn on and notching in the opposite direction. The piece can be discarded, it is not useful. In the remaining parts necessary to make a hole to install the stud, post which is better in the center. Perpendicular in the middle of the cut part is cut another hole.

Then the nozzle is the future of airbrush. One end of the rod should be rounded off with emery cloth and insert into the first notch. A hole on the side, the casing is installed from the handle.

In the lid, too, will have to make a small hole under the rod, the extra length which can be cut with scissors. Before you use the airbrush, it is necessary to fix its position at the top of the tank using silicone sealant or adhesive. Thus, it will be possible to balance the pressure of the air flow inside the system.

To the assembled airbrush with your own hands from the handle lasts as long as possible, instead of a rod and a writing instrument it is better to put the copper tube.how to airbrush

Creating a compressor of the membrane pump

To Make the device will not be difficult. Mini compressor airbrush with your own hands created from automotive electric pump, ideal for creating beautiful drawings on the nails. Of course, it is the quality of the staining and power will give way to the professional devices, but for self-manicure it will come down.

To ready the gun from a ballpoint pen started to operate, it is necessary to connect it directly with the compressor hose. However, the ripple of air created by the pump, will not allow you to evenly lay down the lacquer or paint. So you'll have to add to the system receiver, at least the easiest.compressor for airbrush with your own hands

For these purposes, you can use the expansion tank with the car or plastic canister with a volume of 3-5 liters. Advantagethe first option is that there are output connections to facilitate the installation procedure. They only have to wear the connecting hoses, then secure it by clamps, and the simplest compressor for the airbrush, with his own hands made ready to use.

Homemade gun for airbrushing from a syringe

Before proceeding to its Assembly, it is desirable to prepare in advance all the necessary tools. To make this tool, you will need:

  • Needle and a disposable syringe;
  • The rod of a ballpoint pen;
  • Hotmelt;
  • Plastic or glass bottle with cap;
  • Reservoir for the paint.

The Syringe is fixed on the prepared glass or plastic container in the housing is inserted a tube with a needle. The cover is a few holes for air access. The optimal distance between tip of the pen and the needle can be calculated by the experimental method. The main advantage of this spray gun is easy to replace the tank.airbrush with your own hands from the handle

The Airbrush with your own hands at home from a syringe is created in several stages. First, cut a cone the tip of the handle. Then cut the working part of the needle, after which it is dipped in glue and inserted in the trimmed rod. This should be done in such a way that the tip of the medical needle seen from the metal part of the rod.

Another method of manufacturing a airbrush out of a syringe

To build such a device you will need the following items: disposable syringe with needle, duct tape or Scotch tape, a paper clip, a string and a container of colorant.

The Medical needle should be well heated over a fire, so it is easily separated from the plastic base, and from a syringe to remove the piston. The clip you first need to straighten, then it will have bent slightly. Then one side of the metal clip fasten with needle thread and another is fixed with the body by means of adhesive tape. Moreover, to strengthen the design need to top medical instrument.airbrush from a syringe

After that, insert the tip of the needle so that it was in the middle of the nozzle of the syringe. To made airbrush from a syringe earned, should be in the capacity to add an ink liquid and dip it in the needle. There will be only hard to blow a wide hole.

Done in such a way the airbrush with your own hands at home in the people call “rooduv”. Its Assembly takes about 15 minutes.

How to use the airbrush?

Before you refill the reservoir, it is necessary to dilute the paint to the desired consistency. After all, any colorant, pour into a container should be a little thicker than water.

The Mini-gun to create a unique manicure will be more convenient if the pot of paint to install arm. Airbrush though easy, but to draw quite often for a few hours, what hands are tired to hold it.

To Work with such a device can, if desired, any don't have to be an artist. In airbrushing the main thing — to master the technique of execution. Nail art allows you to create on the nails in unique patterns and unusual graphical composition using special stencils and other accessories.

If a homemade airbrush does not have a compressor, just blow into the back of the case handle. The force of air pressure you can control the range and intensity of the ink jets.use airbrush

Helpful tips

Every beginner should first learn how to do airbrush simple solid figures, lines and shapes. It is best to undergo special training courses that will show you how to properly handle such a device. After obtaining sufficient experience will be able to create even very complex compositions.manicure airbrush

Homemade airbrush will not only make a luxurious and fast manicure at home and save money at beauty salons.


Article in other languages:

BE: https://www.tostpost.com/be/hatn-tul-nasc/3440-aerograf-sva-m-rukam-hatn-h-umovah-kanstrukcyya-vyrab.html

DE: https://www.tostpost.com/de/gem-tlichkeit/3438-airbrush-mit-den-h-nden-zu-hause-entwurf-und-fertigung.html

ES: https://www.tostpost.com/es/la-comodidad-del-hogar/3443-el-aer-grafo-con-sus-manos-en-el-hogar-dise-o-y-fabricaci-n.html

KK: https://www.tostpost.com/kk/domashniy-uyut/3441-aerograf-z-oldarymen-y-zha-dayynda-rylymy-zh-ne-dayyndau.html

PL: https://www.tostpost.com/pl/komfort-domu/3444-aerograf-z-r-kami-w-warunkach-domowych-konstrukcja-i-wykonanie.html

PT: https://www.tostpost.com/pt/o-aconchego-do-lar/3441-aer-grafo-com-as-m-os-em-casa-projeto-e-fabrica-o.html

TR: https://www.tostpost.com/tr/domashniy-uyut/3446-airbrush-kendi-elleriyle-evde-tasar-m-ve-imalat.html

UK: https://www.tostpost.com/uk/domashn-y-zatishok/3443-aerograf-svo-mi-rukami-v-domashn-h-umovah-konstrukc-ya-ta-vigotovlenny.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Combined piled-raft foundations under a wooden house with his own hands: reviews

Combined piled-raft foundations under a wooden house with his own hands: reviews

If you decide to build a grating-pile Foundation for a wooden house, then initially you must find reviews that are left with home craftsmen and professionals involved in the carrying out of such works. This design represents the p...

Multicooker Bork U800: overview, description of programs, reviews

Multicooker Bork U800: overview, description of programs, reviews

In search of high-quality high-class equipment for the kitchen it is necessary to understand that the price will be much higher than the budget options. Multicooker Bork U800 is clear proof of that. Justified its high cost? That c...

Handsfree calls – effective supply system and receiving signal

Handsfree calls – effective supply system and receiving signal

currently there is a great opportunity to create comfortable conditions not only in the apartment or house and offices using a wireless system calls. Such devices are absolutely safe to use as made from practical and modern materi...

Flowers cornflower – beautiful, useful and unpretentious

Flowers cornflower – beautiful, useful and unpretentious

According to Pliny, the flowers of cornflower blue cast out evil spirits. And healers believe that collecting this plant, reading over it spells, it is a prerequisite. According to them, it adds to its magical properties.We, moder...

How to build a house for chickens?

How to build a house for chickens?

Today, a growing number of people seriously thinking about breeding poultry. In addition, it does not need special care, it is still possible to obtain meat and eggs. Before you start laying hens or broilers, care should be taken ...

Moonshine from the slow cooker with their hands, materials, instructions for manufacturing

Moonshine from the slow cooker with their hands, materials, instructions for manufacturing

the Home winemakers do not cease to invent new devices for the production of alcohol, as well as unique recipes of making beer by way of distillation There is even such an original idea as moonshine from the slow cooker.In this ca...