Shunter:specifications and photos

Date:

2018-03-21 12:53:14

Views:

655

Rating:

1Like 0Dislike

Share:

Table of contents:

The Structure of the Railways, private sidings and companies need means capable of producing shunting operations within the station. For these and other functions and was created shunting locomotives, which are different from continuous efficiency.

Purpose of shunting locomotives

shunter

Railway transport operates a huge number of different diesel and electric locomotives. Each of them has its own application, and depending on their technical characteristics, they produce a certain kind of work. Each station needs to rearrange the cars out of the way on the path, the feed path is not for General use, compliance with local distribution of goods. These challenges easy to cope shunter. If curating trains use large locomotives of great power, like 2TE116, Т10МК, 3ТЭ116У, for the production of shunting work where there is no need to move trains to the large weight, use diesel locomotives CHME3, TEM2, THMs. The main means of production local work for the station shunting locomotives. Bryansk produces good quality locomotives that are used in the structure of the Railways.

History

 shunter chme3

The Most common shunting locomotive in the Soviet Union until 1964 was ЧМЭ2. But due to lack of power and subsequent failure of the plan of shunting work the decision was made to design a new, more powerful locomotives of this series. The building was assumed by Prague plant. In 1964, the rails were released two prototypes CME3, which passed all tests perfectly. The locomotive this model along with TEM2 in our days is the most common locomotive for the production of shunting. Along with "CKD Praha" plant "Sokolovo" released locomotives Т444 and Т449 that due to the limited adhesion weight is not widespread. Repair of shunting locomotives should be carried out by specially trained people.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

Specifications CME3

the repair of shunting locomotives

Shunter CHME3 equipped with a bonnet body and an H-shaped frame. The wheel axle box complete with one bearing. The spring suspension of the locomotive is equipped with hydraulic shock absorbers. The locomotive is equipped with six-cylinder four-stroke K6S310DK diesel engine, whose power is 1350 horsepower. Shaft speed is increased to 340-740 rpm, compared to ЧМЭ2. The movement of diesel drives the generator from the battery. Gasoline has considerable weight, which is 13 tons, diesel generator TD-802 weighs 20 tons.

Indicators CME3

  • Weight -114 t
  • Weight equipped locomotive -123 T.
  • Fuel capacity-5000 kg.
  • Oil & ndash; 500 litres
  • Water Supply – 1100 litres
  • Supply of sand - 1500 kg.
  • Maximum speed - 95 km/h.
  • Minimum radius curves – 80 m.

Technical characteristics shunting locomotives series of TEM

shunter photo

The series diesel Locomotives TEM2 TEM1 and widespread on the entire railway network. They have the fuel efficiency, reliability and good capacity. Bryansk engineering plant recently released a test model ТЭМ2М that already has installed four-stroke diesel 6Д49, as well as a more advanced cooling system.

Neither will handle the local operation of the station as shunting locomotive. Photo TEM 2 illustrates the appearance of the locomotive. It can run on curved track with a radius of 80 meters. Full fuel, oil and sand will ensure smooth operation for up to 10 days.

TEM2-equipped diesel ПД1М declared capacity 880кВт in which increased rotation speed of the crankshaft, increased the air pressure to 0,155 MPa. On ПД1М used turbocharger that the action is due to the exhaust gases. Cleaning air to the turbocharger takes place by rotating the air cleaner mounted on the right side of the locomotive. But for air cooling is used finned tube cooler operating by means of a water circuit. For cooling the traction motors use a centrifugal fan. Immediately behind the seat for the driver is a compartment batteries. On the roof of the locomotive hatches are hinged type to supply the sand. The shunting locomotive TEM 2 is able to rearrange the cars great weight way on the path.

To ensure a favourable temperature in the cab air heater is used, and there are heaters for the feet in the right and left side of the cab directly at the workplaces of men serving a locomotive. Thanks to the good insulation of the cabin, TEM 2 can be used at low temperatures. The control panel is equipped with safety devices, speed gauge SL-2M, crane driver to set or to reduce positions, telecommunication, control devices, control buttons of Tihonov and a pedal for feeding sand under the front and rear of the truck.

machinist of the shunting locomotive

The diesel locomotives series of TEM has additional equipment that allows the operator to work alone without an assistant. For this technique equipped portable devicecontrol.

For cooling water and oil on the body of the locomotive is provided blinds. The fuel is heated with hot water, which comes from a running diesel engine. Because the body is designed as a hood unit, the entire equipment of the locomotive have free access.

The Cab is raised above the frame, which gives a good overview. To ensure the timely suppression of fires and safety, the locomotive is equipped with two fire extinguishers. The machinist of the shunting locomotive is required to possess skills in management and to have the appropriate education.

Main parts of the locomotive TEM 2

  • A Reducer.
  • Spotlight.
  • Sandbox.
  • Mine cooling.
  • Fan.
  • The water tank.
  • Diesel generator.
  • The spark arrestor.
  • Air Compressor.
  • Hardware camera.
  • Dvuhmestnij Assembly.
  • Cab.
  • Rechargeable battery.
  • The Heating section.
  • Traction engine.
  • System cooling fan motor.
  • Muffler.
  • Air filter diesel.
  • Fuel tank.
  • The Frame of the locomotive.
  • Truck.
  • Pumps for pumping oil and fuel.
  • Toplivopodachej.
  • Pump of the cooling circuit.
  • Oil filter.

Technical characteristics of the locomotives series TGM

new shunting locomotives

Shunter TGM is designed for shunting work at stations and private sidings.

TGM-4B equipped with a diesel engine 6ЧН21-21 with a gas turbo. Speed, like many competitive models, is 1200 rpm has 2 modes: shunting and train. Train mode allows you to cruise within a few stations, and the train designed to perform tasks within the station.

As for ride quality, shunting locomotive is equipped with a spring suspension mounted on two trucks. Good dynamic qualities soften the load and allow good to enter into curves of small radius. The locomotive is equipped with a manual mechanical brake. The body of the locomotive is made with the use of hatches and hinged hood for easy access to important parts of the unit.

Inside, the cabin is equipped with lights indicating the location of the driver, which can control the machine from both sides. Management of shunting locomotive is alone, ie assistant is not required. The cabin has good noise absorbing qualities. Completed securely fastening the housing to the frame deadens any kind of vibration. As the insulating materials used in the manufacture of the body, contribute to the operation of the locomotive at low temperatures. New shunting locomotives have significant differences compared with the predecessors.

Quality assurance in the repair of shunting locomotives

 shunter TGM

  • Disassemble and assemble shunting diesel locomotive is required with strict compliance of technical documentation.
  • 'll Need specialized, expensive equipment.
  • Availability of all necessary spare parts and components.
  • The Work must be performed by highly qualified specialists.
  • Before starting the repairs necessary to develop several options for production work.


Article in other languages:

AR: https://www.tostpost.com/ar/cars/3002-shunter.html

BE: https://www.tostpost.com/be/a-tamab-l/5306-mane-rovy-ceplavoz-tehn-chnyya-haraktarystyk-fota.html

DE: https://www.tostpost.com/de/autos/5304-rangier-lokomotive-technische-daten-und-foto.html

ES: https://www.tostpost.com/es/coches/5310-manevrovyy-la-locomotora-especificaciones-y-fotos.html

HI: https://www.tostpost.com/hi/cars/3003-shunter.html

JA: https://www.tostpost.com/ja/cars/3002-shunter.html

KK: https://www.tostpost.com/kk/avtomobil-der/5308-manevrl-k-teplovoz-rastyryldy-tehnikaly-sipattamasy-zh-ne-foto.html

PL: https://www.tostpost.com/pl/samochody/5311-manewrowym-dane-techniczne-i-zdj-cia.html

PT: https://www.tostpost.com/pt/carros/5307-ainda-a-locomotiva-especifica-es-e-fotos.html

TR: https://www.tostpost.com/tr/arabalar/5312-manevra-lokomotif-teknik-zellikleri-ve-foto-raf.html

UK: https://www.tostpost.com/uk/avtomob-l/5310-manevroviy-teplovoz-tehn-chn-harakteristiki-foto.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

What are the most reliable cars?

What are the most reliable cars?

Every car owner wants it as little as possible broke down and failed in the most crucial situations. For this reason, a large number of people prefer the more famous and major brands that produce the most reliable cars.it is Diffi...

Firm Lemforder: feedback about the parts

Firm Lemforder: feedback about the parts

products of the company Lemforder known throughout the world, including in Russia. This is because parts that are manufactured by this company are quite reliable and durable. In addition, many car parts Lemforder, which will be pr...

"TagAZ C10": technical features, photos and owner reviews

Compact sedan “TagAZ C10” different from other cars of the Russian production. Perhaps because it is based on the Chinese model JAC A138 Tojoy. Of course, compared with cars produced “AVTOVAZ”, this sedan o...

Sports bike BMW S1000RR: features, description, operation

Sports bike BMW S1000RR: features, description, operation

Sport bike BMW S1000RR immediately attracts the attention of a record for a Superbike engine. Liter engine turns it into a real conqueror of roads, which can cope with and the raceway, and the maze of city streets, and even cross-...

Caution: the airbag!

Caution: the airbag!

the Main objective of airbags – in the most rapid time to slow down human movement and prevent it from hitting parts of the machine. Despite the fact that its action seems simple, engineers working on improving and at the pr...

Automatic transmission - how to use? Switching modes and control of transmission

Automatic transmission - how to use? Switching modes and control of transmission

Today, many novice drivers, and motorists with experience, choose a car with automatic transmission. Beginners, as a rule, are often frightened of the need to change gears when driving, well experienced drivers just appreciated th...