Spray gun for latex paint. Working with them is much more convenient and faster

When performing interior decoration apartment or house increasingly used latex paint. This very popular and high-quality material, its price is comparable with quality oil paints. A surface painted with latex paint dries quickly, it has no peculiar smell, safe to human health. In addition to use it is quite simple. The vodoemulsionka can be applied by roller or brush, but to facilitate his work, it is best to use a spray gun.

The Spray gun for latex paint has many advantages:

• Allows you to paint a much larger area in much less time;
• The paint is applied thin and uniform layer, which subsequently dries quickly;
• When using the spray gun uses a lot less paint than when applied by the same roller or brush;
• The process of applying paint with a spray gun more “clean”;
• Spray gun for latex paint can also be used for applying paint or putty.

On the market of construction equipment is available from a wide range of different goods, including guns, and therefore the main task – to choose their own most suitable. As to the price – it all depends on its type. The cheapest tool you can find for five hundred rubles. A professional will cost many times more.

What are the guns

1. Manual. This is the easiest, and of course, the cheapest option. Consists of a pump and the so-called rods. Paint was sprayed using a fishing rod, and the pressure in the reservoir is created using a hand pump. Manual spray gun for water-based paints are not high performance, but it can be used for chalk or lime mortar.
2. Electric. Is the most popular type among fans of do-it-yourselfers. Electric spray gun for latex paint works At 220 V, and does not require any additional equipment. There are several modifications of this instrument, but the most popular model, the principle of which is based on the airless method of spraying dye.
3. Pneumatic. Concerning already to the category of professional, it has high performance, allows you to work with a variety of compositions. Pneumatic spray gun for latex paint works on the principle of compressed air and can have both the lower and the upper location of the tank.

What you should pay special attention when choosing a spray gun:

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

• The Material from which made the housing. It is advisable to choose the aluminum with Nickel anti-corrosion coating. Spray gun for latex paint with a plastic housing lighter, but less reliable.
• The Grille with the holes on the nozzle cap. It should be aluminum, and even better – stainless steel or brass.
• Quality gaskets. Many paints are a solvent which can corrode low-quality pads. The most reliable way is the strip of Teflon.

As for the location of the tank, then there is no fundamental difference. As for material, the metal tank is washed better, but in the capacity of nylon can easily determine the ink levels.

The Most convenient and compact option are electric spray guns. They can be carried on the back with a strap that greatly simplifies paint work.