Clutch replacement on "Renault Logan" with his hands

Date:

2018-04-07 00:00:20

Views:

1574

Rating:

1Like 0Dislike

Share:

Table of contents:

Clutch System – this is one of the most important parts of the vehicle with manual transmission. Motorists often fail to notice the moment when the clutch asks for a replacement. But this is a serious site. Let's look at when you need a replacement clutch on “Renault Logan” and how to do it with their hands.

Symptoms

There are several symptoms that help to find out exactly what with the clutch, and whether you need to change it or enough repair. So, the first sign that speaks of failure mechanism – the noise and crackling in the process of incorporating or changing the gears. clutch replacement on Renault Logan

When you start the car twitches. Also drives can slip. In addition, the clutch can "scorched". To say about this burnt smell in the cabin. If there is at least one symptom of the above, then replacing the clutch on “Renault Logan" mandatory.

Disk Resource, and replace

It Often happens that the operating time of the clutch disc is not more than 150 thousand kilometers. In rare cases the item may take more than 200 thousand kilometers. It all depends on the riding style, as well as the workload of the car.

How to replace grip with your hands

For any modifications to “Reno-Logan” the manufacturer sets dry clutch with one disk and a Central diaphragm spring – she's a clutch basket. Self node can be changed if you have the necessary knowledge of the device of the mechanism, the principles of its action. It is also necessary to have skills of car repair.

Cooking tool

For the replacement procedure will require a conventional key “11” or end head. replace clutch cable on Renault Logan

You should Also prepare a flat head screwdriver. For centering clutch disc is necessary shipping – can be applied the one that is designed for front-wheel models VAZ.

Dismantling clutch

First, the car should be raised on a lift or a garage with a pit. It is better not to engage in the demolition works alone – with the helper process will be much faster.

For removing clutch need to remove the engine from the transmission. Without this it is impossible to get to the clutch Assembly in the car. To do this Unscrew the bolts that secure the gearbox housing to the motor.

Next hold the flywheel with a screwdriver. You need to make sure that it does not rotate. It was necessary to loosen the bolts of the pressure disc. Bolts are recommended to relax as uniformly as possible. clutch replacement on Renault Logan 1 4

When all nuts are removed, you can remove the engine flywheel disk and clutch basket. Next, the disassembled parts should be carefully examined. Even small cracks and other damage are not allowed. If the problem is discovered, you need to install a new set. Partial clutch replacement on “Reno-Logan” is not recommended.

After that, the splines of the drive element is applied a special grease. It should be refractory. Now you will need a mandrel. It can help you to properly install the drive. The correct position of the disc when the protruding portion is on the side of the spring basket. Then the pins are mounted basket and wrap fastening bolts. Further, the bolts each in turn evenly tighten.

It only Remains to remove the mandrel and install the transaxle to its rightful place. You should also connect the clutch cable. You can begin daily operation.

Clutch Replacement on “Renault Logan’ 1.4

The Process is almost similar to the previous one. To replace the lift car and remove front wheels. Then remove battery and everything that hinders the access of the checkpoint. Next Unscrew and remove the clutch cable. After this turn fasteners to engine mount and all the bolts holding the transaxle to the engine. Then remove the driveshafts and some suspension components. Engine lift on the supporting element, Unscrew the fasteners from the bottom of the box and remove the transaxle side.

It only Remains to Unscrew the 6 mounting bolts that hold the clutch basket. Next, change the old kit to the new one.

Important points when replacing

It Must be remembered that the simplicity of the process of replacing the clutch on “Renault Logan» requires a sufficient attachment strength. Often motorists due to small errors add yourself more work than necessary. The fact that visually it is not always possible to accurately diagnose the condition of parts of the mechanism. Usually the car owner think everything is fine, and replacing the clutch disk on “Renault Logan” is not needed. This is a misconception. replace the diskclutch on Renault Logan

Experts recommend to replace the kit completely and not leave any details. The only way to guarantee that the car will work reliably and efficiently for a long time.

Clutch Cable

Every owner of a car "Renault" knows that to replace the clutch cable on “Renault Logan” have no more than 10 minutes. Yes, it is. All the complexity will be associated with setting and adjustment. It often happens that the symptoms are talking about the need to replace the clutch, and really only need to replace the cable. Sometimes we can solve the problem of his adjustment.

Before the replacement cable should put the car on the Parking brake. Then prepare a tool – two key "7” and “10”. Next, remove the inlet air filter. If the engine is 16-valve, corrugation rests on the clamp-it also need to be removed. On 16-valve engines still need to remove the intake silencer of the system. When the nozzle of the air filter is cleared, the box filter can be easily retracted to the side. The cord on the end has a tip that has a small weight.

To release the cable, Unscrew the two nuts. If they are not unscrewed, you should clean the threads. One nut held the key, the other gets out. To do this, two of the key “10”. Then Unscrew the second nut-ferrule is held by the key “7”.

The Lever that holds the cable – this is a fork. The sinker is pulled out of its slot. To do this, pull the cable towards the fork. Then out of the slot remove the clutch, which ends with a cable sheath. clutch replacement on Renault Logan with his hands

Inside, the cable pull on yourself, and remove the tip from the mounting place for the clutch pedal. The second tip squeeze forward. You need to press it under the hood. Then in reverse order to install the new cable.

Conclusion

Thus, there is a clutch replacement for “Renault Logan” his hands. It's not difficult, but rather time-consuming procedure.


Article in other languages:

AR: https://www.tostpost.com/ar/cars/9649-clutch-replacement-on-renault-logan-with-his-hands.html

BE: https://www.tostpost.com/be/a-tamab-l/17336-zamena-schaplennya-na-reno-logan-sva-m-rukam.html

DE: https://www.tostpost.com/de/autos/17341-austausch-der-kupplung-auf-renault-logan-mit-ihren-h-nden.html

ES: https://www.tostpost.com/es/coches/17349-la-sustituci-n-de-la-tracci-n-en-renault-logan-con-sus-propias-manos.html

HI: https://www.tostpost.com/hi/cars/9659-clutch-replacement-on-renault-logan-with-his-hands.html

JA: https://www.tostpost.com/ja/cars/9659-clutch-replacement-on-renault-logan-with-his-hands.html

KK: https://www.tostpost.com/kk/avtomobil-der/17336-auystyru-l-n-su-reno-logan-z-oldarymen.html

PL: https://www.tostpost.com/pl/samochody/17311-wymiana-sprz-g-a-do-renault-logan-w-asnymi-r-kami.html

PT: https://www.tostpost.com/pt/carros/17311-substitui-o-da-embreagem-na-renault-logan-com-suas-pr-prias-m-os.html

TR: https://www.tostpost.com/tr/arabalar/17342-yedek-debriyaj-renault-logan-kendi-elleriyle.html

UK: https://www.tostpost.com/uk/avtomob-l/17329-zam-na-zcheplennya-na-reno-logan-svo-mi-rukami.html

ZH: https://www.tostpost.com/zh/cars/10487-logan.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"Lamborghini Elemento" and the most interesting things about "the Sixth Element"

Probably the most significant automotive premiere 2010-th year was the presentation of "Lamborghini Elemento". This luxury car – a real work of art of the Italian automotive industry. And therefore, you should talk about its...

Tractor

Tractor "Belarus-1221": device specifications, description and reviews

Agricultural work are very time consuming and energy consuming. To produce the desired crop farmers are forced to make just a tremendous effort. Therefore, the question of mechanization in the fields in our day is particularly acu...

The dealership

The dealership "Avtolegion" in Ekaterinburg: reviews

In all Russian cities there are showrooms. In recent years their number has increased markedly. With so many customers it's hard to choose that company where the services are offered with good service. In Ekaterinburg the car at a...

VAZ-2110, brake system: schematic

VAZ-2110, brake system: schematic

this article describes the design of the car VAZ-2110: brake system, main components and mechanisms. You will learn about the General scheme of the actuator, the design of all elements.General structureArranged brake system of VAZ...

Tuning the bumper with his own hands

Tuning the bumper with his own hands

Tuning bumper for car – this is a pretty heavy operation, which involves many processes. It can be executed by professionals or with their hands, but still it is hard work that takes a lot of time and effort.General informat...

Stels Trigger 50 – your universal soldier

Stels Trigger 50 – your universal soldier

one has only to look at the Enduro Stels Trigger 50, as is immediately apparent the versatility of such a vehicle. After all, it is well suitable for urban roads and residential trips out of the city.praise – this featureLet...