Greenhouse "Uralochka". Features of installation

Date:

2018-04-05 20:00:25

Views:

908

Rating:

1Like 0Dislike

Share:

Table of contents:

The purpose of a greenhouse "Uralochka" is to create the most favorable climate for growing crops in gardens and suburban areas. It is a metal structure made of profile pipe, covered with anti-corrosion polymeric coating that is applied in the factory.

greenhouses Uralochka

Frame greenhouses “Uralochka”

A Frame with increased strength, made of steel profile 20 x 20 mm. Height is 2 m, width of approximately 2.5-3 m Greenhouse “Uralochka” does not require installing Foundation and can be mounted directly on the ground. All steel structural elements coated with a polymer anticorrosive paint that protects the greenhouse from rust, temperature changes and adverse atmospheric influences.

Attachment to the land is provided by pins. The frame has 2 end doors and 2 vents. The kit includes everything needed for Assembly nuts, locks, screws, handles, wind hooks and screws for fastening polycarbonate. If necessary, a separate greenhouse retrofitted side vents.

Greenhouse “Uralochka” reinforced differs from the standard models having a more rigid frame due to the increase in the number of arcs running through every 67 cm, but not in regular patterns through 1m.

greenhouse Uralochka

Advantages

  • The design of the greenhouse "Uralochka” due to the arched structure is able to withstand increased snow and wind loads.
  • Durability thanks to the anticorrosion coating.
  • There is a possibility of lengthening greenhouses “Uralochka” with the help of the extension unit, which is very convenient.
  • Complete with all the necessary elements to assemble the greenhouse.
  • Polycarbonate, which is covered by greenhouses is durable, reliable and light material with low weight and high thermal conductivity.
  • To install the framework do not need a Foundation.

greenhouse Uralochka reinforced

Recommended

Staff evaluation: system and methods

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

business activities. its essence and basic functions

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

Equipment

The complete greenhouse includes all the necessary elements for a sufficiently secure attachment of the coating. In addition, the attached illustrated detailed instruction with all stages of the Assembly.

Greenhouse “Uralochka” has the minimum number of parts, which greatly speeds up Assembly and allows you to set design, even own hands.

Packed frame of the greenhouse is compact enough. It includes the following units:

  • The base and the longitudinal tie - 1pc.;
  • The ends of the Assembly - 1pcs.;
  • Arc greenhouses - 1pc.;
  • Fastening elements and accessories, the passport and the instruction on Assembly and installation - 1 PC.

polycarbonate greenhouses Uralochka

Build

The Assembly polycarbonate greenhouses “Uralochka” is fast enough 2 people can do it in 3-4 hours, while having a minimum number of tools.

Build Steps

  • First of all, you need to select a site and to level the surface of the earth.
  • Before performing the Assembly of the frame should cellular polycarbonate to close the ends. This is done as follows: on the levelled and hard surface are cut by the construction of the knife along the ruler 3 sheet of polycarbonate, length 2 m, width 2.1 m. Next, unpack the package with the ends of the greenhouse. One of them is placed horizontally so that the door and the window above it opened facing directly up. On the surface of the end face is placed polycarbonate sheet face-up (marked on the protective film). Previously with the inner side of the sheet should remove the special protective film.
  • In the same way, you can close the other end of the polycarbonate.
  • Now to assemble and install with the level of the base of the greenhouse from the pipe.
  • Set the trimmed ends coated and bonded with the grounds.
  • Installed On the guide arc. Combine the arc and the ends of the longitudinal rods.
  • Running the fixing frame to the ground. To do this, are driven into holes located in the corners of the frame and at the connection parts of the base, pins.

The installation of the polycarbonate to the frame of the greenhouse start with the edges of the frame.

  • The arc fit the polycarbonate sheet.
  • Material is fixed with screws.
  • Similarly, is the closure of the opposite side of the frame. The middle part is covered by the last third leaf and secured with screws. Further fixed to the base polycarbonate sheets.
  • The Final step is to install the door handles.


Article in other languages:

AR: https://www.tostpost.com/ar/business/11719-uralochka.html

BE: https://www.tostpost.com/be/b-znes/20974-cyapl-cy-uralochka-asabl-vasc-mantazhu.html

DE: https://www.tostpost.com/de/business/20976-gew-chshaus-uralochka-eigenschaften-montieren.html

ES: https://www.tostpost.com/es/negocio/20996-los-invernaderos-uralochka-caracter-sticas-de-montaje.html

HI: https://www.tostpost.com/hi/business/11730-uralochka.html

JA: https://www.tostpost.com/ja/business/11730-uralochka.html

KK: https://www.tostpost.com/kk/biznes/20966-zhylyzhaylar-uralochka-montazhdau-erekshel-kter.html

PL: https://www.tostpost.com/pl/biznes/20930-szklarnie-uralochka-cechy-monta-u.html

PT: https://www.tostpost.com/pt/neg-cios/20938-o-efeito-de-estufa-uralochka-caracter-sticas-de-montagem.html

TR: https://www.tostpost.com/tr/business/20972-seralar-uralochka-zellikleri-montaj.html

UK: https://www.tostpost.com/uk/b-znes/20956-teplic-uralochka-osoblivost-montazhu.html

ZH: https://www.tostpost.com/zh/business/12512-uralochka.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

How to cook electric? How to make a vertical seam by electric welding. How to boil metal by electric welding

How to cook electric? How to make a vertical seam by electric welding. How to boil metal by electric welding

often it is required to connect metal parts or pieces of parts. There are several ways to get the desired result. Most often to connect the iron and steel parts used method of welding.what is it based?How to cook electric? In orde...

Horse breed Percheron: photo, price and description of the breed

Horse breed Percheron: photo, price and description of the breed

the name of the horse breed, the Percheron comes from the name of the French province of Perche, where they were bred. The appearance of this breed occurred gradually and many centuries.History of the breedAfter a permanent crossi...

Cash registers mercury manual and reviews

Cash registers mercury manual and reviews

the Crisis of the 1990s years is well remembered by residents of Russia – a drop in production, rampant inflation, unemployment and hopelessness. But even in this difficult time appeared, the company managed to rise in the p...

Business without investment

Business without investment

it Should be mentioned that business without investment is impossible in principle. The attachment is always there. Another thing is that not all investments must be in cash 100%. Own time, effort, and energy – also attachme...

What is the shop? A detailed analysis

What is the shop? A detailed analysis

the article describes what the shop when they first appeared, and what were the reasons for their occurrence in the Middle ages.Productionthe People at all times valued those who had some skills, for example, to sew clothes or mak...

Pharmaceutical production: characteristics, trends, investing

Pharmaceutical production: characteristics, trends, investing

it is No exaggeration to say that providing citizens with medicines and drugs is an important component of national security. And pharmaceutical production is the most important socially significant sector of the economy.Governmen...