Clock oil to lubricate the mechanism

Date:

2020-03-21 13:20:14

Views:

523

Rating:

1Like 0Dislike

Share:

Table of contents:

When the watch is out of order – this is a problem that need to be addressed immediately. This can help a special liquid.

Why you need oil?

oil movements

The Application of special lubricant to the clock mechanism is necessary to prevent or reduce friction, wear surfaces, as well as to protect the device from corrosion.

Oil for the lubrication of the watch movement must meet its purpose and to spread to all parts evenly. To do this, at the stage of production it tested for lubricity. That is, the clock oil is tested in the mode of liquid friction. And if it has the necessary lubricity (the ability to withstand normal pressure and not be broken), only then it is used to repair mechanisms.

As a rule, oiliness depends on composition. For example, bone have better lubricity than mineral based fluids.

Principal oils domestic production

clock oil

To lubricate the clock mechanism or similar device, apply special products. For example, for devices that operate in normal conditions, it is possible to apply oil such as MC-3, BCH-12, MCM-5 or MW-6. If the mechanism is often located in open space and at low temperatures, then it is recommended to use clock oil MN-60 or similar types of this brand. For example, MN-45 and MN-30.

In devices designed to operate in States with a tropical climate, usually used time oil type MCT and MPT. Such products are antiseptic additives, which do not allow to grow bacteria and other fungal organisms. To such time oils are MPT-3 and MCT-3. In addition, such products are still at the stage of production goes through various tests. This helps to increase the moisture resistance and chemical stability.

Recommended

Staff evaluation: system and methods

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

business activities. its essence and basic functions

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

Oil of domestic production for microslow

Also, you should mention the RS-1. It nismapname, hour soft butter yellow or light brown tint for General use. But such a lubrication is rarely used for the whole mechanism, as it has low tensile strength and is held on the nodes only due to capillary forces. However, such clock oil has some advantages over other types of similar products. For example, it is more hardy and well kept in the device even if the temperature is over 100 °C. therefore, such a grease is best applied only to microugly and not for the entire clock mechanism.

Oil overseas production

watch oil moebius

There are a variety of lubricants from a foreign manufacturer, but the most popular is Moebius. This oil is for clockworks of Swiss production, which are of the highest quality and resistance to temperature changes. That is, in fact, it can be used in any environment, regardless of climate and place of residence.

The main products of this manufacturer are:

  • Watch oil Moebius 8000 – natural products, which are designed to be applied to main parts of the device. In addition, it is often used for the lubrication of transfer mechanisms and springs of alarms. The main feature of this oil is that it does not spread when applied. Simply put, this lubricant has a sufficient rigidity.
  • Moebius Synt-A-Lube 9010. It is a synthetic oil with high resistance to temperature changes (from +70 °C to -29 °C) and degree of viscosity. As a rule, Moebius Synt-A-Lube is meant for stones, release mechanisms, bearings and balances midsize and large devices. For example, they smeared the old wall, floor, or wall clock. It is popular among artists who are engaged in repair of meters and various mechanical measuring instruments.
  • MOEBIUS D5 – universal oil for minimal friction and a significant load on the clock mechanism. Intended for slow-moving parts of the small and medium-size devices, as well as for lubrication of the pallet stones and gears.

Guidelines for the application of oil

clock oil mn 60

As mentioned earlier, the correct lubricant will depend largely on the accuracy of the clock. It is therefore important to observe some rules. For example, lubricant must be applied only with the help of special devices, greasers, which reduce the chances of unnecessary consumption of liquid. And before you start to repair the clock mechanism, it must be thoroughly cleaned from dust.

The Application of oil is done on the nodes: starting with basic movement and ending with the stones of the balance.

Order lubricant

oil to lubricate the clock mechanism

The Application of oil is done in stages:

  1. Grease the main gear. Oil is supplied to the spring, then the sites of interaction with the drum and between the wheels. It is recommended to use the MC-3 or equivalent.
  2. Grease the wheel. To work with manual or pocket watches generally use the MZP-6 and MCM-5. Oil is applied to the eight points of the wheel (axle four top and four bottom).
  3. Lubrication of the constant-force device. As a rule, suchfixtures are often used in pocket watches in order for them to start without a key. To work with it, you can use the oils of MC-3 or RS-1. But keep in mind that the RS-1 applies not to the whole mechanism, but only for part of it. For example, the oil can lubricate the transfer lever (the small projection in the fixture). MC-3 is more suited for gears, clockwork shaft and axle.
  4. Lubrication of the switch mechanism and the system of descent. For this procedure, use of MZP-6 and IBP-12. This oil lubricated the bill and the Central wheel or its upper part, and descent system. It should be remembered that the IBP-12 do not need to put on the axle anchor plugs, because then the clock will stop and they will have to fix.
  5. Lubrication of the stones of balance. In this process, the used oil IBP-12, or similar liquid. It is important to apply the grease before the start of the build procedures to clean stones without mud coating.

And most importantly, when performing all these operations, it is necessary to carefully monitor the amount of oil. Applied too much lubricant might damage the watch and will need repairing. The recommended amount of fluid in the butter dishes – 1/3 of the height of the device.


Article in other languages:

AR: https://www.tostpost.com/ar/business/21581-clock-oil-to-lubricate-the-mechanism.html

BE: https://www.tostpost.com/be/b-znes/39092-aley-gadz-nnae-dlya-zmazk-mehan-zmu.html

DE: https://www.tostpost.com/de/business/38620-l-st-ndigen-f-r-die-schmierung-des-mechanismus.html

ES: https://www.tostpost.com/es/centro-de/38381-el-aceite-de-horas-para-la-lubricaci-n-del-mecanismo-de.html

HI: https://www.tostpost.com/hi/business/23145-clock-oil-to-lubricate-the-mechanism.html

JA: https://www.tostpost.com/ja/business/21158-clock-oil-to-lubricate-the-mechanism.html

KK: https://www.tostpost.com/kk/biznes/39469-may-sa-atty-mehanizm-n-maylau-sh-n.html

PL: https://www.tostpost.com/pl/biznes/41173-olej-godzinny-do-smarowania-mechanizmu.html

PT: https://www.tostpost.com/pt/neg-cios/40822-o-leo-de-horas-para-a-lubrifica-o-do-mecanismo-de.html

TR: https://www.tostpost.com/tr/business/35977-ya-saatlik-ya-lama-mekanizmas.html

UK: https://www.tostpost.com/uk/b-znes/39928-maslo-serv-s-dlya-zmaschuvannya-mehan-zmu.html

ZH: https://www.tostpost.com/zh/business/23725-clock-oil-to-lubricate-the-mechanism.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Shopping center

Shopping center "seasons": the photo, characteristics and address

In Moscow, there are a large number of shopping centres where both residents and guests of the capital can purchase a variety of goods and services. However, there are systems that are designed for the highest class of society. Su...

Salon

Salon "ATTS Michurinskiy": online reviews and services

buying a car is a serious and deliberate step, because a car is purchased for the long term. Buying a car, a customer wants not only to be confident in your purchase, but to make the process more comfortable for yourself. Now car ...

Shopping center

Shopping center "Riviera" in Moscow: features a variety of leisure activities and address

Living in the bustling rhythm of the metropolis, is not always possible to manage simultaneously produce shopping and entertainment. The solution to this situation is to visit the shopping centers. There you will be able to make a...

Bow Parade: growing on the greens

Bow Parade: growing on the greens

To obtain high-quality greenery outdoors or in a greenhouse often grow onions Parade. Cultivar was bred by Dutch breeders and is ideal for growing from seed to greenery.the Variety has a number of features, including the lack of t...

Shop

Shop "Metro" in Rostov-on-don

Brand Metro Cash&Carry is one of the largest retailers in the world. The history of this brand started with one store in Germany. Today the network of hypermarkets has thousands of points in every corner of the world, 8 their ...

Shopping centre

Shopping centre "Lotte Plaza": overview, stores, features and reviews

Shopping center Lotte Plaza is one of the most successful projects implemented on the territory of the Moscow premium in the field of specialty. This shopping and entertainment complex - one of the constituent parts of the same bu...