Status: "Printer disabled". How to turn on the device? A few simple tips

Date:

2018-03-23 12:06:10

Views:

491

Rating:

1Like 0Dislike

Share:

Table of contents:

Regardless of what printer is used very often users face the problem that when sending a document to print, instead of the result, the system displays a message indicating that the device has the status “the Printer is turned off”. How to enable it and fix this problem several effective methods read on.

Potential problems

Before you make a decision on how to resolve the problem, you must understand the essence of the problem.

the status of the printer is turned off how to turn

Things that can cause such irregularities in the operation of the device, it is possible to allocate the following:

  • No physical connection to the computer or the network;
  • Activated offline mode;
  • Contaminated or empty cartridges;
  • Stopped the print service;
  • Problems with device drivers.

Status: "Printer disabled". How to turn on the device in the simplest way?

The first phase is to apply the simplest and, as it may seem, it is trite solution. When the system issues a message like "printer Status: disabled”, include the HP device, or any other printer, or MFP, you can try pre-unplugging it from the mains, and after a couple seconds of turning on again.

However, as a rule, all modern devices will be self-diagnostic (led will blink), then the printer will be ready state (led should lit).

But in some cases this does not help, and the system again warns you that the device status is set to "Printer off". How to turn on the device? You need to check the physical connection via USB cable. It turns out that the system device driver installed (it seems to be “sees”), but actually the printer is simply not available.

Recommended

How to get out of

How to get out of "Skype" on the "Android" and not only

How to get out of "Skype" "Android"? This question bothers many users. The thing is that the messenger is not so difficult. But there are features that are only for mobile versions. To log out of Skype in this case more difficult than it seems. But i...

Kingo ROOT: how to use the program to gain administrative rights on Android

Kingo ROOT: how to use the program to gain administrative rights on Android

The Gadgets on the platform Android regained the lion's share of the market. Developers are continually perfecting the OS, trying to fit the needs of the users, but from year to year admit palpable mistake: forbid the owner to "stuffing" of his gadge...

How to get from Stormwind to Tanaris: practical tips

How to get from Stormwind to Tanaris: practical tips

World of Warcraft is an iconic MMORPG, uniting millions of players around the world. There are many locations and puzzles, secret trails and larger, but rather dangerous paths. Sooner or later, every player chose the side of the Alliance, we have to ...

On the other hand, if the enable led is flashing constantly, the problem may be that the cartridge is empty or ink powder. Therefore, it needs to be replaced. It also happens that cartridge for some reason is contamination of the surface. In this case, would be enough to wipe it and do a full computer restart with restart the printer.

Status: "Printer disabled". How to: enable (“Windows 7" device settings)?

But most of the problems associated with software failures or inappropriate settings. For starters, sorting out the question of how to change the status of the printer “Disabled” (how to turn on the device), you need to look at his condition, and installed options.

Standard “control Panel" section needs to go printers and faxes in which you first need to find the printer you want to make sure that the device print installed by default.

how to change the status of the printer is disabled how to enable

Next in the status window of the device you need to use the menu “Printer” and clean check lines for pause printing (deferred printing) and use the offline mode of operation, if fitted. The idea is that after that the status changes to “Ready”. Sometimes it helps clearing the print queue.

Restart the print service

But it may happen that the printer itself is all right, but the service responsible for printing, for some reason disconnected or has malfunctioned.

the status of the printer is disabled how to enable Windows 7

In this case, call the division of services using the command services.msc entered in the console “Run” (Win+R) to find appropriate service (“print spooler" or Printer Spooler), stop it, disconnect the printer from the power outlet for about 60 seconds, then start the service again and enable the device.

Fix driver problems

Also often the problem of the appearance of system messages about disabled status of the printer can be observed in case of driver problems (obsolescence, disruption, damage files, etc.).

the status of the printer is disabled to enable hp

In this situation you will have to completely uninstall the drivers from the system, at least from the same “device Manager”. If they appear among the installed programs, uninstalling the it is better to make section for programs and components. After that, the best solution would be to download the latest driver from the website of the manufacturer of the equipment and subsequent installation.

You Can do and easier. If the driver is really outdated, or simply does not match the type of device, you can use automated programs update the drivers like Driver Booster.

Using the tools-fixer

Some users and experts recommend to use special programs that allow you to resolve such problems automatically.

In the simplest case to apply the recommended small utility Fix It Centre from Microsoft, but to more fully diagnose and troubleshoot problems with printers of any type will fit the HP Print And Scan Doctor.

A Few words in conclusion

Finally, the experts at Microsoft recommend using Windows 10 to install the latest updates, but I think it hasrelated to the problem so far as.


Article in other languages:

AR: https://www.tostpost.com/ar/computers/3569-status-printer-disabled-how-to-turn-on-the-device-a-few-simple-tips.html

BE: https://www.tostpost.com/be/kamputary/6282-status-prynter-adklyuchany-yak-klyuchyc-pryladu-nekal-k-prostyh-saveta.html

DE: https://www.tostpost.com/de/computer/6281-status-drucker-offline-wie-sie-ihr-ger-t-einschalten-ein-paar-einfache.html

ES: https://www.tostpost.com/es/los-ordenadores/6287-el-estado-la-impresora-est-desactivada-como-activar-el-dispositivo-uno.html

HI: https://www.tostpost.com/hi/computers/3571-status-printer-disabled-how-to-turn-on-the-device-a-few-simple-tips.html

JA: https://www.tostpost.com/ja/computers/3570-on.html

KK: https://www.tostpost.com/kk/komp-yuterler/6284-m-rtebes-printer-osylma-an-alay-osu-ryl-ysy-b-rneshe-arapayym-ke-ester.html

PL: https://www.tostpost.com/pl/komputery/6286-status-drukarka-jest-wy-czona-jak-w-czy-urz-dzenie-kilka-prostych-pora.html

PT: https://www.tostpost.com/pt/computadores/6282-status-que-a-impressora-est-desactivada-como-ativar-o-dispositivo-algu.html

TR: https://www.tostpost.com/tr/bilgisayarlar/6288-durum-yaz-c-kapal-etkinle-tirmek-i-in-nas-l-bir-cihaz-birka-basit-ipu-.html

UK: https://www.tostpost.com/uk/komp-yuteri/6286-status-printer-v-dklyucheniy-yak-uv-mknuti-pristr-y-k-l-ka-prostih-por.html

ZH: https://www.tostpost.com/zh/computers/3877-status-printer-disabled-how-to-turn-on-the-device-a-few-simple-tips.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Racing for children 5 years of age. Computer games for boys

Racing for children 5 years of age. Computer games for boys

Today, computer games are firmly in our lives. They played not only adults but also children. Almost every day there are new releases that can captivate for a long time. One of the most popular genres are the race. For children 5 ...

Detailed instruction: how to disable laptop microphone

Detailed instruction: how to disable laptop microphone

the Owners of laptops often wonder about how on the laptop to mute the microphone. Here it is not even that on personal computers to make it easier, but rather that the user does not have these knowledge. Overall, what PC is that ...

Skyrim: how to become a Jarl, Thane, or a vampire

Skyrim: how to become a Jarl, Thane, or a vampire

the Cult rpg from Bethesda released in the fall of 2011, managed to win the hearts of millions of fans. Gorgeous graphics, amazing gameplay for many hours - what could be more attractive to core gamers? But when you study the game...

Lineage 2: error 1073, Troubleshooting, and start the game

Lineage 2: error 1073, Troubleshooting, and start the game

for about 9 years Russian gamers playing Lineage 2, and about 3 years in Lineage 2 Classic. These computer games, despite the long period of existence, are of interest have a huge number of fans. Created by Korean developers of th...

How to connect to WiFi without knowing the password-step by step instructions

How to connect to WiFi without knowing the password-step by step instructions

Today almost every second person enjoys the Internet. It can be as home network and an unsecured or a secured wireless. Often, users are interested in is a legitimate question about how to connect to WiFi without knowing the passw...

Where and how to buy a house in

Where and how to buy a house in "Skyrim"?

In addition Hearthfire made possible the construction of houses. If you besides there is a mod for family and children, without estate is not essential.in “last” to build a house? You must first become Thane, after the...