How to properly lay tile by modern standards

Date:

2018-03-17 16:31:10

Views:

198

Rating:

1Like 0Dislike

Share:

Tiles – is a good cladding material, however, work on its styling traditionally are quite expensive that many people simply can not afford. Save precious family budget. And then the question arises: how lay tile? Worth investigating.

How to lay tileLaying tile is a very laborious work that requires delicacy and max precision. If at the initial stage to prevent any inaccuracy, it will greatly affect the outcome of the entire work. So let's understand how to properly lay tile.

How laying ceramic tilesTo work you need a very specific set of tools: construction mixer, hydrolevel any, notched trowel, tile, Bulgarian small size with diamond circle. Materials required: tiles, adhesive, grout, distance wedges and TIC.

The Tiles are placed on a prepared surface, which should be perfectly smooth. The surface you want to get rid of dust, and then carefully primed. If you want to clad both the floor and walls, then you must first treat the wall as this will prevent your tile floor from unnecessary pollution. From the surface of the floor should step back a distance equal to the thickness of the tile with glue, and leave a space for the expansion joint. It is best to use for this rack. It will not allow the tile to slide under the resulting load.

How to lay tileIf we talk about how to lay tile, you must first mix the glue. The mortar should be plastic, but not liquid. After that it needs about five minutes to stand up, to Mature, and then it must stir again. Next, you need to pick up a tile and use it to determine the direction of its styling. On the back side there are arrows. They should all be pointing in the same direction. Smooth the surface with a notched trowel used for applying the adhesive to the surface of each tile, and a gear for removing residues. The spatula is required to keep the surface relatively perpendicular to the ridges turned out the same height.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Talking about how to properly lay tile, it should say that then it needs to be set in place, and then pressed to the wall by a light tapping on its surface. Also installed and all of the next tile, and the level is used to control their position relative to the vertical and horizontal directions, and the presence of all elements in one plane. If there are minor deviations, they can be corrected by means of simultaneous pressure on several fragments of a long level. In the gaps between the tiles, you must install the remote crosses.

The Other rows in the same way, and all cross seams are crosses to get the formation of clear smooth lines.

If we talk about how laying ceramic tiles, it does so likewise, only with the amendment that all work is carried out on the floor. Near the walls the tiles carefully dive under already pasted on the wall. This allows to get a smooth seam around the perimeter.

If we talk about how to properly lay tile, it is worth noting that a few days after the work is done ready for grouting. They need to be cleaned from dust and glue residue, and then RUB the part with a rubber spatula. The day after that you can wash the tile.






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Professional approach to apartment interior design – turning your dreams into reality

Professional approach to apartment interior design – turning your dreams into reality

the interior Design of residential premises every year is gaining popularity, as many owners of the apartment began to understand that the repair – is not just hanging new Wallpaper or painting the doors a different color an...

Alabaster - what is it? Alabaster: how to breed

Alabaster - what is it? Alabaster: how to breed

If your house or apartment is made repairs, without alabaster is indispensable. From which one obtains this material, if he is not harmful to human health? Alabaster - what is it? The answers to these questions are given below.Fea...

What is better: a well or hole for a country house

What is better: a well or hole for a country house

When purchasing a suburban area raises the question of water supply. Special companies conduct exploration area and offer different options sources. What is better: a well or hole for a country house?the Advantage of drilling is t...