How to properly use attachment on a drill for cutting metal?

Date:

2019-10-01 09:00:25

Views:

1188

Rating:

1Like 0Dislike

Share:

Table of contents:

brush on a drill for metal cuttingElectric drill – the tool that is already in almost every home. With its help it is possible to drill almost any material, cut a hole under the castle, to mix the paint or even cut metal!

Of Course, many of these operations are not “clean” tool and special devices. So brush on a drill for cutting metal would be extremely helpful if you are interested in performing different kinds of mechanical works.

Some information

With the help of this device the metal is convenient to make round holes. Do not believe sellers who say if its good to use for straight and long cuts. In a case where it is preferable to be LBM.

However, the nozzle on the drill “Cricket” provides an opportunity not only to make a hole in steel or duralumin sheet but to treat the edges with special abrasive material. The cost of such products is low, most often it is in the range of thousand rubles.

Working Principle

nozzle on the drill cricket

Professionals attachment on a drill for cutting metal is better known under the name of  electric scissors. Making different shaped and circular cut-outs, she can do the job quickly without producing any particularly strong noise.

Metal is treated the better, the better the characteristics of the drill. If you are using a powerful tool with the possibility of high revs, you will certainly be to clean, without burrs and chips, slice. The advantage of a “Cricket” and similar models is the fact that the sheet metal is absolutely not deformed.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

To Whom it might be useful?

If you are dealing with sharp and cutting the metal, perform the body work or something like that, then brush on a drill to cut metal you would need. And for simple jobs around the house it will fit. As it can help you to easily cut metal up to 1.5 mm thick, the work will be done.

"barrier to entry"

In contrast to the complex industrial or domestic machines, for the nozzle you will not have long to adapt. Even a beginner can easily use a nozzle on the drill “Cricket” ANCHOR, cutting through one hour to one and a half meters of metal.

If you have at least some modern drill, you can easily attach this device to it. In General, we can conclude that the purchase of a nozzle which is preferable for the latter, as it will pay for itself very quickly.

nozzle on the drill cricket anchorSome drawbacks

However, you should not assume that the nozzle on the drill for cutting metal is a full replacement for several tools. Like it or not, but the power of this combination of devices is hardly enough for even a distant comparison with professional electric scissors.

And the supported metal thickness 1.5 mm will not give you the opportunity to carry out some really serious work.

If you do not build illusions about performance, this device it can be purchased for those occasions when you need to do something not too demanding crafts for the house and garage. In this case, the nozzle will save you a lot of time and money.


Article in other languages:

BE: https://www.tostpost.com/be/hatn-tul-nasc/36943-yak-prav-l-na-vykarysto-vaecca-asadka-na-dryl-dlya-rezk-metalu.html

DE: https://www.tostpost.com/de/gem-tlichkeit/36593-als-richtig-wird-der-aufsatz-auf-den-bohrer-f-r-die-zerspanung.html

ES: https://www.tostpost.com/es/la-comodidad-del-hogar/36410-c-mo-se-utiliza-la-boquilla-en-el-taladro-para-el-corte-de-metal.html

KK: https://www.tostpost.com/kk/domashniy-uyut/37282-alay-paydalanylady-nasadka-na-drel-metall-kesuge-arnal-an.html

PL: https://www.tostpost.com/pl/komfort-domu/38655-jak-prawid-owo-u-ywana-szczotka-na-wiertark-do-ci-cia-metalu.html

PT: https://www.tostpost.com/pt/o-aconchego-do-lar/38370-como-corretamente-utilizado-cabe-a-sobre-a-broca-de-corte-de-metal.html

TR: https://www.tostpost.com/tr/domashniy-uyut/33757-do-ru-kullan-lan-bir-du-ba-l-zerinde-matkap-metal-kesme.html

UK: https://www.tostpost.com/uk/domashn-y-zatishok/37608-yak-pravil-no-vikoristovu-t-sya-nasadka-na-dril-dlya-r-zannya-metalu.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

The lady's slipper: description, tips for growing

The lady's slipper: description, tips for growing

once the beautiful goddess Venus wandered into the Northern forests. Tired after a long journey, decided to give his legs a rest, kicked off my shoes, and forgot about them. And they have become in the beautiful flower, called &ld...

How is the replacement of the hardware in the plastic Windows with their hands

How is the replacement of the hardware in the plastic Windows with their hands

the Replacement of hardware in the plastic Windows does not cause any difficulties even for inexperienced person, subject to reviewing the available features of the work. This reduces the probability of failure of parts and of the...

Overview of the heater Electrolux EWH 50 SL

Overview of the heater Electrolux EWH 50 SL

It's time to buy a hot water heater? But the store is so much choice, I just don't know which one to choose? Then this article is for you. There are three main criteria that help to make the right choice:tank volume;price (cheap w...

Sheathed house siding with his hands: the features of the process

Sheathed house siding with his hands: the features of the process

the Exterior of the house plays a big role. And much will depend on how you will decorate the facade. This article will tell that is siding for the house.Different materials used for the cladding of the house with the front part. ...

How to choose a telescope: tips and reviews

How to choose a telescope: tips and reviews

the Flight of a bird, the scarlet sunset, a full moon or a distant star is able to permanently attract the gaze, much to the delight and awe. The world around us is filled at once wonder and mystery, if you pay attention to them. ...

How to make wedding candy boxes. The templates with your own hands

How to make wedding candy boxes. The templates with your own hands

In France, the 16th century was a very nice wedding tradition: guests in honor of the occasion and in gratitude presented a small box with sweets. In those days chocolate to Europe came from India and were very rare. Of course, no...