Castle "larva". Replace "larvae" (castle)

Date:

2018-03-18 23:05:55

Views:

469

Rating:

1Like 0Dislike

Share:

Table of contents:

Every owner of real estate sooner or later think about changing the lock to their apartment or office. Why is this happening? This process is associated with the breakdown of the old fixtures or loss of key. Sometimes the lock is changed after a change of tenant and the expiry date of the product. Most often, the replacement comes directly "larvae". Castle in this case, a new install is not necessary.lock cylinders

What is the "maggot"

The system that ensures the secrecy of the keyhole and providing security, called "larva". It protects the person from entering the premises of the attackers, and so on. In the "larva" is inserted the key. After turning pins arranged in the right order, which ensures opening of the door. If they are in the wrong order, then to get into the room will not work.

At the moment, in many modern devices the pins are replaced by washers, probes, or special blocks. Even with this, the secrecy and reliability "larva" does not depend on the type of filling and its quality, precision setting and the number of parts.replacing the lock cylinder

Replacement

Not all key products, which are used for installation on doors, made so that you can replace components of fixtures. For example, some options have to be replaced completely. We are talking about the code arrangements that is made so that to replace only one lock cylinder will not turn. Will have to replace it with a completely new design.larvae of castles vases

Types of locks

The sale has several types of locks that are widespread. Often they are used specifically for doors in the premises.

There are the following models: cylinder, disc, pin, Phillips and are also particularly difficult.

Locks can be applied and cut-in. The second option is considered more reliable. This system is able to close the room from two sides. In the interior can be as a spinner and a regular key.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

In Addition, the locks are divided into upper and lower options. They have added some features and options additional fixation.

If we consider the material and the number of combinations, it depends on the wear resistance of the lock, the difficulty of selection of a key and resistance to mechanical factors.replacement cylinder door lock

Creation of "larvae"

"Larva" lock is available in three levels of difficulty.

  1. The First – and low – involves from 100 to 10 thousand character options. To create this type of lock uses low-quality materials.
  2. Medium level works with 5 to 50 thousand combinations. Typically, the mechanism of such a beautiful castle, but about the build, there are negative reviews. Often such a "larva" of the lock on the door of VAZ.
  3. Highest level is characterized by 100 thousand or more versions of code. Assembly at the best level, the materials used is also good.

Each of the resulting products, different features. Often they affect the possibility of replacing "larvae."replacing the lock cylinder vases

Cylinder locks

This design of castle was developed in the mid-19th century. Due to the simplicity and ease of operation, a cylinder mechanism has spread rapidly and currently are the most popular.

"Larva" and keys for the lock

All cylinder products are designed under DIN standard/RIM. At the moment the range is small. It should be noted that all larvae from manufacturers working with the first standard model. To choose the correct one for yourself, you need to pay attention to the door thickness, mounting screws.

The Cylinders are divided into several systems: "key-spinner", "key-key", half-cylinder, the system with the gear. It should be noted that in all cases except the first, "larva" is changed without any problems. With the gear will have to torment - it is too fine-tuning. Besides, it is best to "larva" in this castle had specialist.

"Key-spinner" works on the principle: from the outside – the key internal specialist spinner. Centravac, the device has a special Cam movable type, which actuates the crossbars. Replace the "larvae" of the castle (WHA) will be a doddle.

"Key-key" is characterized by the key wells on both sides. The door from the outside with a lock pick will not open, if the internal is inserted and fixed key.

The Door half cylinder only opens from the outside. These products are used for utility rooms, buildings and so on.

The Mechanism with gear is quite complex and its technology depends on the manufacturer and model of the lock.door lock cylinder vases

Replacing the cylinder with your hands

You Have to remove the "larva", which later will be replaced. In its place, and installed a new one. The process takes less than 30 minutes. Use the screwdriver, screws and a tape measure.

After work, you should check the lock on the smoothness and precision of work. If there are any problems, you should do it all over again, otherwise there is a likelihood that the product will be off during operation.

Disk locks

Than this type of locks are different from any other cylinder models? Instead of pins and pin wheels are used. They are mobile and need to open the mechanism. The key for such a lock has a semicircular cross-section, it should have the notches to move the disks.

The Described design had the opportunity to change the cylinder, however, only related. At the moment to buy it will be quite difficult, so it is best to change the whole mechanism.

Cross locks

In these locks there is an unusual larva. Inside the box are pins, which are arranged in a special order. What is it? They are mounted on 4 sides and move when you turn the key. For an account of this castle has many permutations, but often, experienced attackers reveal these products with the help of a Phillips head screwdriver.

In these locks the larva is not recommended to change, it is best to immediately, if necessary, to change the very product. But, if this is not possible, the lock is easy to disassemble and carried out the replacement parts.

Pin tumbler locks

"Larvae" of these locks are made under two specific key types: perforated and English.

The Second option is unreliable. The first opened with a drill. If desired, it can be embossed, that is not done right the first time. To replace the core, special skills are required.

The most sophisticated locks

Currently, manufacturers are interested in expanding their technology, creating the highest quality fixtures. So now on the market, you can find reliable, durable and safe locks. If you select quality options, then think about fixing the "larvae" is not necessary. However, for example, if you lose a key and this procedure is necessary – everything is done as simple as possible. Often the damage people do replacement cylinder door lock.

The Larva complex of the castle

In order to create a complex locking mechanism used branestawm, titanium, a million possible combinations, the refractory type of metal (pins) on the key there are floating parts.

For such locks to find the key is practically impossible, but it is easy to change the "larva". But you need to understand that cost is quite expensive.

...

Article in other languages:

AR: https://www.tostpost.com/ar/cars/2942-castle-larva-replace-larvae-castle.html

BE: https://www.tostpost.com/be/a-tamab-l/5212-zamak-l-chynka-zamena-l-chynk-zamka.html

DE: https://www.tostpost.com/de/autos/5211-burg-die-larve-ersatz-larven-burg.html

ES: https://www.tostpost.com/es/coches/5217-el-castillo-de-la-larva-la-sustituci-n-de-larvas-el-castillo.html

HI: https://www.tostpost.com/hi/cars/2944-castle-larva-replace-larvae-castle.html

JA: https://www.tostpost.com/ja/cars/2942-castle-larva-replace-larvae-castle.html

KK: https://www.tostpost.com/kk/avtomobil-der/5215-lyp-lichinka-auystyru-rttar-lyp.html

PL: https://www.tostpost.com/pl/samochody/5217-zamek-larwa-wymiana-larwy-zamku.html

PT: https://www.tostpost.com/pt/carros/5213-o-castelo-de-larva-a-substitui-o-de-larvas-do-castelo.html

TR: https://www.tostpost.com/tr/arabalar/5219-kale-larva-de-i-tirilmesi-larva-kilit.html

UK: https://www.tostpost.com/uk/avtomob-l/5217-zamok-lichinka-zam-na-lichinki-zamku.html

ZH: https://www.tostpost.com/zh/cars/3196-castle.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Jeep Compass - a new generation SUV

Jeep Compass - a new generation SUV

Recently, Russia announced the start of sales of the new generation SUVs “Jeep Compass” 2014 lineup. Updated the jeep a little changed in appearance, but mostly significant changes have affected the technical side of t...

"Peugeot 605": photos, specifications and reviews

the Official debut of the car «Peugeot 605”, a photo of which is presented below, was held during the international exhibition in Frankfurt in 1989. Model produced over the next ten years. On world markets, the novelty...

The car's horn, how it works

The car's horn, how it works

For the chime, all vehicles must have an audible signal. It is sometimes necessary to prevent accidents.it is Quite common to vibrating signal. It includes a housing, a core with a coil, an anchor, membrane, rod, breaker, resonato...

Oil consumption - what should it be?

Oil consumption - what should it be?

For every car owner, it is normal to monitor any changes in his car. Unfortunately, they rarely aimed for the better as parts wear out, harden rubber products, gaskets also lose their properties.All these fluids are referred to as...

Repair of instrument panel: what is needed?

Repair of instrument panel: what is needed?

first, let's say that the most common two categories of problems that are associated with the dashboard. The first is electrical malfunction, the second crack. The second case often occurs with the machines of the old type. Consid...

"Telemobile" in Moscow and St. Petersburg has become 5 times as popular in 2017

unlike other services that provide services of car-sharing, “Telemobil”, according to customer feedback, has become the most used among residents of Moscow and St. Petersburg.car sharing – short-term car hire thr...