What an electric skateboard?

Electric skateboard is a compact version of the traditional transport models in this category. Due to the presence of a motorized drive these devices allow to easily get to any destination without much effort.

What is an electric skateboard? Models with four wheels are called electrobody. One-wheeled electric devices known as hoverboards are. However, a key feature of both developments is the possibility of movement without repulsion feet.

Looks Like an electric skateboard? Photos of similar vehicles, which can be seen in this material, show that such development practically does not differ from conventional four-wheeled skateboards.

Features

The average electric skateboards able to pass on a single charge of about 20 km, a top speed of up to 12-15 km/h electric skateboard may include one or more engines with power up to 350 watts. Eat traction elements from lithium-ion built-in battery. As for full charge, in most models, it takes not more than two hours.

Features

Electric skateboard is due to activation of the motor by pressing a special button. Adjustment of speed and direction during the drive is operated using remote controller.

Electric skateboard opens up the possibility for movement in multiple speed modes. For users who are not particularly familiar with these developments is the strengthening of the motor at low rpm. Accordingly, it is possible to switch the engine mode to drive at the maximum speed that can be unsafe for untrained people.

Professional figure skates: review, views, and reviews

Ice skating is popular with many. But if you do it professionally, you will need the proper equipment. First and foremost, professional figure skates, which have to meet certain requirements. Before I talk about the most popular brands of this mercha...

Spinner for pike with his hands. The most successful turntables on the pike. The best turntables for pike

The Most effective bait when fishing for pike is considered a spinner. Type it is vertical, oscillating, and rotating. While all of these lures has one goal: the imitation of a fish.All about turntablesthis type is characterized by an absolute unique...

Telescopic fishing rod for fly-casting

Modern rods are composite structures of glass or carbon tubes-knees, having the shape of a cone or cylinder.When choosing a rod professionals pay attention first and foremost on their basic parameters: weight, material, length with stiffness. However...

Electric skateboard is able to be reversed. However, in contrast to the automatic speed change modes, which can be performed directly in the process drive for enhancing rear traction is required.

Security

As practice shows, the braking distance of electric skateboards when driving at maximum speed is over 15 meters. So for a comfortable ride and for personal safety before operating electric skateboard requires a long familiarity with such transport. This allows you to purchase certain skills, to feel confident, to develop a sense of balance. Preliminary preparation for operation of a motorized Board will allow you to avoid falls, serious injury and bruises.

Electric skateboards with your hands

If desired, availability of tools and materials to construct his own can be almost anything. Are no exception, and electric skateboards. Obretenov small financial and labor costs, you can prepare home-made, which would be no worse developments well-known manufacturers.

Work is performed in the following sequence:

1. To start from plywood or a light piece of wood running form the future Board. To cut costs the Board size, which will be sufficient to accommodate the engine and the electric component box.
2. Prepared a small electric motor, which should have decent power and high torque. A great solution would be to install a motor from the RC transport. You will also need to find a small, lightweight lithium battery, multiple batteries with a capacity of about 500 mAh connected in parallel.
3. Traces the interaction of the motor with the wheels. On the axle and the engine is mounted gear 5 and 36 teeth respectively. The connection of these elements takes place through the strap.
4. The Next step – motor installation at the bottom of the product. It does not matter what for this use fasteners. Importantly, the engine is firmly held on the Board. To protect the battery pack, the receiver signal of the remote controller and motor from damage will need to build a strong and well-ventilated housing. It is best to use for these purposes the metal mesh, pre-calculating the position of all functional elements of the future of the skateboard.

Based on the above plan of action, you can assemble a pretty decent Board with an electric drive. Most likely, a home-made skate will turn out much heavier than the factory models. But the build your own hands will allow you to save quite a substantial amount of money. Moreover, in the future, this skateboard can be upgraded.